19-Inch Rack Tolerance: What to Specify on Your Drawing
19-inch rack tolerance — what to specify on your drawing for rack-mount panels and rails that fit the first time.

Rack-mount panels and rails for AI servers have to fit a 19-inch rack — and fit the assembly they go into. The fastest way to get parts that fit the first time is to put the key tolerances on your drawing.
What is a 19-inch rack?
A 19-inch rack is the standard frame that AI servers mount into. Rack panels, rails and mounting hardware are made to fit that frame and the equipment inside it. Tell us the rack standard your part fits into, and we make the part to your drawing.
Tolerances to specify
For CNC machined parts: general ±0.1–±0.05 mm, precision ±0.02–0.01 mm. Other parts are evaluated per drawing. Put the key tolerances on the drawing — the dimensions that decide whether the part fits — and we inspect to those dimensions.
Flatness
Panels are checked for flatness where it matters. If a panel must sit flat against a frame or a sealing surface, specify the flatness on your drawing and we will evaluate it per drawing.
Holes and cutouts
Mounting holes, I/O cutouts and ventilation openings are placed to your drawing. Send hole positions and cutout sizes with the drawing — do not leave them to be guessed.
Surface finishing
Anodizing, polishing and plating as specified on your drawing. Finish is planned with the part's tolerances in mind.
Inspection
Parts are checked against your drawing at each stage: dimensional checks during production, first article on request, and a final check before export packing. Inspection equipment: CMM, tool microscope, multi-joint arm, automatic and manual height gauges, dial indicator, marble platform and roughness measurement.



