Fanless enclosure chassis with integrated heatsink fins — Process: extrusion + CNC
Custom Fanless Enclosures
Protofirster makes custom fanless enclosures to drawing for edge AI and industrial computers — the chassis is the heatsink. No fan, no vents, no moving parts: heat moves from the processor into the enclosure through a thermal plate and out through extruded fins.
Sealed against dust, silent, and maintenance-free — built for outdoor cabinets, factory floors, vehicles and other harsh environments where a fan would clog, fail, or pull in dust. Air-cooled (fanned) variants are available on the same platform — ask in your RFQ.
Typical Components
Finned covers and heatsink lids — Process: extrusion + CNC
Front and rear I/O panels with connector cutouts — Process: CNC
Internal thermal plates and heat spreaders — Process: CNC
Sealed covers, gasket grooves and mounting brackets — Process: sheet metal + CNC
DIN-rail, wall and vehicle mounting kits — Process: sheet metal + CNC
What Matters
Fin geometry
fin height, thickness and spacing set how much heat the enclosure can shed; thin fins must stay straight and evenly spaced.
Flatness for thermal contact
the faces where the processor module meets the thermal plate must sit flat, or heat has nowhere to go.
Sealing
gasket grooves machined to drawing so the enclosure stays dust-tight once closed; no fan openings to leak.
I/O cutouts
connector positions held per drawing so every port lines up first time.
Finish
anodized surfaces that survive outdoor handling, washdown and repeated assembly.
Repeatability
small batches; the tenth unit must match the first.
From Drawing to Delivered Parts
Send drawings & RFQ
DFM review & quote
simple parts within 4 hours, complex parts within 24 hours.
Confirm & first article
Final inspection & export delivery
Materials
Aluminum
the standard choice for extruded finned enclosures
Copper
for heat spreaders where the drawing calls for it
Stainless steel & engineering plastics
as specified on your drawing
Quality & Inspection
We machine and inspect to your drawing. We do NOT test thermal performance — heat dissipation is set by your thermal design; we build the enclosure that carries it.
IQC
material certificates checked on arrival.
FAI
first article inspected before production runs.
IPQC
in-process checks through the batch.
FQA
final 100% inspection, report on request.
Inspection
CMM, tool microscope, multi-joint arm, height gauge, dial indicator, roughness measurement.
What to Send for a Quote
Drawings (STEP / IGES / DXF / PDF)
Material, quantity, surface finish
Key tolerances (fin thickness and spacing, flatness of thermal faces, I/O cutout positions)
Mounting method (DIN rail / wall / vehicle)
Minimum order: just 1 piece — we accept single-piece orders

